Signs You Need a Good Toilet Bowl Replacement

If you find yourself faced with the prospect of a toilet bowl replacement, there are Plumbers in Lewisville TX you can use to make sure you get quality work done that will last for years. As with any other household appliance, clogged toilets should be fixed as soon as possible to prevent any issues. As with any electrical repair, an electrician should be called out to diagnose any potential plumbing issues. Once repairs are made, flush the toilet to remove all soap scum and water from the tank. A new toilet bowl should then be installed and if possible, a glass surface should be added to protect the toilet from scratches.

toilet bowl installation

Nails – Whether working with a pre-made or custom toilet tank, it’s always important to have the right tools on hand. One tool that should always be on hand is a pair of bolt guns. These handy devices allow you to easily pry open bolts without having to use the force of a wrench. Another important tool to have on hand is a pair of pliers, especially useful if a nut or bolt has been installed and has been seated incorrectly.

Plumbers Putty is used when installing and tightening nuts and bolts. A basic set of plumber’s putty is composed of a base, white, translucent putty, and a bunch of long brass bolt carriers. The long brass bolt carriers are simply rolled up and held by the putty. To use the putty, place the putty on the bolt and apply gentle pressure until the stubborn bolts loosen. When you feel that the bolt is no longer resisting, carefully grasp the brass carrier and gently push it down until a new hole has been drilled. Be sure to spread the putty on the area that has been drilled in order to create a smooth surface.

Toilet bowl Installation – Wax Ring The easiest part of the whole process is laying down the wax ring. You will need a large enough ring to accommodate all the bolts that will be installed. Loosely cover each hole that will be drilled, making sure to include any places where the bolts will be seated. It’s important to have the wax ring on the inside of the flange, as it prevents water from penetrating the flange. The wax ring also prevents wax from dripping down and collecting at the bottom of the flange.

Toilet bowl installation – Drain Pipe Plumbers will need to cut their holes in the flange, but first they need to make sure that the flange is straight and the wax ring is properly placed in place. This is done using a spirit level. Once the level is established, the plumber can begin drilling the holes. To prevent the base from shifting forward and causing some damage to the floor, he will install drains and let them run through the center of the flange. Once the drain pipe is installed, he will fit the flange to the drain pipe with bolts and then turn the toilet upside down.

Toilet bowl installation – Toilet tank The tank is next installed over the drain pipe. This is done with nuts and washers. A valve guide can be useful for knowing which nuts are best to use. After the nuts and washers are installed, the valve can be attached to the tank. The valve should be turned all the way down and turned once per minute until it begins to lift.

Toilet bowl installation – Toilet seat Next, the toilet seat is installed. If it’s a manual flushing toilet installation, the seat should fit snugly into the hole created by the drainage pipe. If it’s a pressure flushing toilet installation, the seat should be screwed into the flange. It should be held in place by nuts and washers.

Toilet bowl and flushing mechanisms – To ensure the longevity of the new toilets and to prevent leaks, a water sealant should be applied to the inside of the flange. The two bolts that attach the toilet tank to the floor should be tightened to secure the tank. Proper installation procedures are provided with the products to make sure the process is safe.